Graphited asbestos packing with oil
t202l1 t emperature+q450f¦ ph:2-13 linear speed:10m/s pressure:80bar at202l2 temperature+q250f¦ ph:2-13 linear speed:8m/s pressure:60bar
This is a packing made by asbestos yarns, treated with lubricant and graphite. Used in pump, valve, etc. the working medium are steam ,air industrial water,peturm oil.The packing with METALLIC (copper wire, inconel wire or stainless wire) are also available.
Spec:3.0mm - 50mm
Asbestos
Static/dynamic sealing packing at201l1 static/dynamic sealing packing: braided high quality asbestos yarns impregnated with ptfe dispersion, used in pumps and valves for commonly corrosive medium (acid, alkali, oil, steam, ammonia, etc). At201l2 dynamic sealing packing: it append especial lube, is the same with reciprocating pump and rotating in high linear speed.
Pure Flexible Graphite Packing is made from expanded graphite yarn braided into through all kinds of technology of braiding . They are almost suitable to all media, such as hot water, steam, acids, alkalis, organic solvents,hydrocarbons, low temperature liquids, etc. The sealing cap ability is more better and safety,it is the most effctive composite parts forsolving problems, Pure Flexible Graphite Packing is very popular. 1.Flexible Graphite Packing can be used in valve and some rotary application, high temperature valve and soot blowers. 2.Flexble Graphite Packing is suitable for all application, seals hot water, high temperature and pressure steam, heat transfer fluid , hydrogen gas, ammonia, Solvents. Hydrocarbons, Cryogenic liquids, etc.
Variety: all kinds of graphite packing, graphite packing ring, spiral wound gasket, graphite thread
Specifications: Adjust according to customer requirements
Performance: Use temperature: -200~800In non-oxidizing medium
Product Usage
Various pumps,valves,chemical instruments,metallurgy,electric power,etc. ,used as static sealing components
PTFE Graphite Packing
The packing is woven of graphite PTFE yarn twisted through a mixture of PTFE dispersion resins and fine graphite powder plus moderate amount of heat-resistant lubricant.
PTFE Graphite Packing with oil
Packing: Packing made of 100% g PTFE yarns, and re-impregnated with a silicone lubricant with density about 1.6g/cm3.
Applications
For use in pumps, valves, reciprocating and rotating shafts, mixers and agitators.
Especially designed for services involving surface speeds and temperature higher than those normally specified for pure PTFE packings.
Can be safely used in all chemical pump applications with the exception of molten alkali metals, fluoride, fuming nitric acid and other strong oxidizing agents.
It is also against water, steam, petroleum derivatives, vegetable oil and solvents.
It is a braided packing made of PTFE yarn containing graphite particles and anti-corrosive lubricant. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self-lubricating packing does not score the shaft and minimizes sleeve replacement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids(aqua regia, fuming nitric acid, fuming sulfuric acid, etc.) forcentrifugal pumps, autoclaves agitators, mixers, etc.
Spec: 3.0mm - 50mm
It is flexible braided packing which is made of an innovative expanded pure graphite yarn. It can be used to seal hot water, high temperature and pressure steam, leat transfer fluid, hydrogen gas, ammonia, organic solvents, hydrocarbons, cryogenic liquids, etc., except fewer strong oxidizer .They can be applied to the equipments and devices in peroleum,electricity generation ,chemical ,pharmaceutical and light industries.
With stainless Steel wire. 99% pure Graphite. Packing size: 10 kg Roll Packing.
Minimum quantity: 10 kg
Price 1650 Rs per Kg.
Packaging & Forwarding Charges Extra
GST 18% extra applicable
